China Suppliers > LIAONING DECHENG SCIENCE & TECHNOLOGY GROUP CO.,LTD. > DCSH 21A CPE Cable Jacket Compound
- Search Product
-
- Details for DCSH 21A CPE Cable Jacket Compound
-
DCSH 21A CPE Cable Jacket Compound
Category : Polymers/Synthetic Rubber
CAS NO : EC NO : MF : MW : Specification : CPE Cable Jacket Compound Packing : 25KG/CARTON Product description : DCSH 21A CPE Cable Jacket Compound (Fire retardant Thermoplastic Compound under the temperature at 85℃) Ⅰ.Illustration With Chlorinated Polyethylene (here below called CPE), blended with other additives, DCSH21A Jacket has excellent properties of fire retardancy, wearing-proof, tearing-proof, cold-resistance, weathering-resistance and excellent mechanical properties. It is equivalent to ST2 type thermoplastic Jacket according to IEC60092-359 standard, say flame retardant thermoplastic Jacket Compound and meets UL1581-2001 standard. With its excellent properties, excellent extruded surface, lower density & lower cost, our DCSH21A is the best ideal substitution of fire retardancy & heat-resistance PVC products and its relevant products. Ⅱ.Application It is mainly used for the Jacket material of CATV cable, power limiting electric circuit cable, power limiting warning electric circuit cable, etc. It also has outstanding properties of weather-resistance, UV-ray-resistance, etc. So, it is can be also used for Jacket material of shipyard electrical cable and control cable under temperature at 85℃. Ⅲ.Comparison of Material Properties &Standard NO. Test Item /Unit /ST2 amog IEC60092-359 /DCSH21ASheet /DCSH21AFinal Pdt 1 Mechanical properties before aging 13.8 14.0 1.1 Tensile Strength MPa ≥12.5 450 430 1.2 Elongation at break % ≥150 1.3 Shore Hardness A 92 92 2 Mechanical properties after aging (100℃,7days) 2.1 Maximum of Tensile Strength MPa 12.5 15.0 15.2 2.2 Change ratio of Tensile Strength(Maximum) % -25～+25 8.7 10 2.3 Minimum of Elongation at break % 150 390 380 2.4 Change ratio Elongation at break(Maximum) -25～+25 -13.3 -11.6 2.5 Maximum Weight Loss mg/cm2 1.5 0.95 0.88 3 Pressure Test at high temperature(80℃) Maximum Allowed change % 50 30 28 4 Impact Brittle Test at low temperature Test Temperature ℃ -30 Passed Passed 5 Oxygen Index % 30 30 Oxygen Index can be adjusted according to the customers’ requirement. Ⅳ.Processing Condition General extruder is recommended. Extruder (L/D) ratio: >20 Compression ratio: 3:1; Temperature of extruder: 120 -145℃; Squeeze or semi-squeeze extrusion is recommended. Ⅴ.Package & Storage Generally, 25kgs in one carton box or depends on customers' requirements. Shape of the material: Rectangle rubber sheet, pellet, or depends on customers' request. The material should be stoned at clean, dry, draughty warehouse. LIAONING DECHENG SCIENCE & TECHNOLOGY GROUP CO.,LTD. （formerly Dandong Decheng Plastic & Rubber Science &Technology Co., Ltd.） Qianyang Economic Development Zone, Donggang, Liaoning, China 118301 Tel: 0086 415 7154051 Fax: 0086 415 7162016 MSN:Jennyliudecheng@hotmail.com E-mail: dechengchem@yahoo.com.cn Http: www.dechengchem.com Uses : Cable Jacket Synonyms : no data
- Inquire
-
DCSH 21A CPE Cable Jacket Compound