SWD959 Series SH125 One component

     moisture cure polyurethane (rigid) system

          industry metal anticorrosion protective coating

Descriptions                Anticorrosion and protection projects take place in various fields of the modern industry and most applied two components coating. The two components coating requires on-site preparation performance which not only increase labor work but also easily influence the painting quality by the improper proportion. In addition, the film quality is much more serious depended on the operation environment conditions. SWD Urethane Co., USA developed one component industry metal anticorrosion protective coating which provides a new channel for the anticorrosion field. This product is easy to use with excellent anticorrosion performance. It has been widely used in many fields of the America, etc.

Characteristics            Applied with one component polyurea polyurethane resin prepolymer as main film forming material, curing by absorption and reaction with air moisture, the coating contains large amount of urea bond, urethane bond and hydrogen bond which makes it to be excellent in physical and stable chemical properties with high performances of acid resistance, alkali resistance, salt resistance, oil resistance and water resistance. The coating is smooth, full bright, dense and tough, with high adhesive strength, temperature variation. It can be painted on simple surface treatment substrates, easy to use, with wide demand for the performance environment.

Specifications

Adhesive strength                            10.9 Mpa

Impact resistance                             ≥50kg•cm

Temperature variation                         -40------+180℃

Wear resistance（700g/500r）                  9.8mg

Acid resistance 45 H₂SO₄ or 15%HCI, 30d        no rust no bubbles no peel

Alkali resistance 40%NaOH, 30d                 no rust no bubbles no peel

Salt resistance 80g/L, 30d                       no rust no bubbles no peel

Salt spray resistance 1000h                      no rust no bubbles no peel

Oil resistance 0# diesel Crude oil 30d              no rust no bubbles no peel

Data of performance

Color                        Multiple colors as customers’ need

Luster                        glazed

Density                       1.02g/cm³

Volume solid content            78%±2%

VOC                         ≤178g/L

Recommended dry film thickness   150-200μm

Theoretical coverage             0.13kg/sqm (calculated by the above solids percentage and dry film thickness of 100 microns)

Practical coverage                Allow appropriate loss coefficeint

Dry time                       1-3h

Overcoating interval              min: 3h, max: 29h

Overcoating method              Airless spray, Air spray, Brush, Roller

Flash point                      58℃

 Recommend procedures                        

Application scopes           Anticorrosion and protection of various metal structures in industry field

Shelf life                  10 months (Indoor with dry and cool conditions)

Packing                    20kg/bucket. 25kg/bucket

Production area            Minhang District, City of Shanghai (20% of raw materials imported from SWD US)

Security                   To apply this product must be accordance with the relevant national regulation of sanitation, safety and environment. Avoid contacting the wet coating.

Global applicability         Our company aims to provide worldwide customers the same coatings, but sometimes, some small adjustments are made to satisfy each region conditions and international norms, in this case, an alternative product data will be provided.

Integrity declaration         Our company guarantees the reality of the listed data, due to the diversity and variability of the application environment, please test and verify it before use. We don’t take any other responsibilities except the coating quality self and reserve the right of modification the listed data without prior notice.