SWD900 Series SH101 Two components pure polyurea spray elastomer

anticorrosion waterproof coating

Descriptions              Polyurea is a coating reacted by isocyanate component (referred to as Part A) and amide component (the R component). Following the high-solids coatings, waterborne coatings, radiation curable coatings, powder coatings and other low (no) pollution coating technologies, Spray Polyurea Elastomer (referred SPUA) technology is a new solvent-free, pollution-free green construction technology which is developed to meet environmental requirements in nearly two decades abroad. Praised as “omnipotent” ideal material in the coating technology field, Spray Polyurea Elastomer technology is the greatest discovery in the late 20^th century. It’s a revolutionary leap of traditional construction technology which combines new technology new material and new procedure together. It established a higher standard for the material protection industry which broke the traditional concepts of anticorrosion and protection.

  Characteristics         SWD Urethane Co., USA developed a two components solvent free environment friendly pure polyurethane coating in 1992. It has high reactivity, fast cure be sprayed forming at any bent, inclined and vertical surface, without sagging, high elastic, dense and seamless material can completely insulated air, water, oxygen penetration, with super adhesive strength and impact resistance properties. It’s integrated anticorrosion, waterproof, wear resistance, aging resistant performances together. No pulverization and crack peel up or fall down after long- term outdoor work with the alternating impact of cold, heat, rain and snow. Polyurea has a history of more than 20 years in North America and other developed countries, it has very strong market demand and widely used in many fields such as aviation, traffic, petroleum, chemical, metallurgy, power generation, construction and move property etc.

Specifications

Adhesive strength (concrete base)                   2.9 Mpa( or substrate broken)

Adhesive strength (steel base)                      11.3 Mpa

Tear strength                                    80.6kN/m

Tensile strength                                  17.8Mpa

Elongation                                      472%

Penetrate resistance                               2.3Mpa

Temperature variation                             -40------+120℃

Wear resistance  （700g/500r）                     5mg

Acid resistance (10%H₂SO₄ or 10%HCI, 30d)           no rust no bubbles no peel

Alkali resistance 10%NaOH, 30d                     no rust no bubbles no peel

Salt resistance 30g/L, 30d                           no rust no bubbles no peel

Salt spray resistance 2000h                          no rust no bubbles no peel

Oil resistance 0# diesel crude oil 30d                  no rust no bubbles no peel

Date of performance

Color                        Multiple colors as customers’ need

Luster                        glazed

Density                       1.01g/cm

Volume solid content            99%±1%

VOC                         0

Recommended dry film thickness   1000-3000μm

Theoretical coverage             2.04kg/sqm (calculated by the above solids percentage and dry film thickness of 2000 microns)

Practical coverage                Allow appropriate loss rate

Dry time                       5-20s

Overcoating interval              min: 1h, max: 24h

Overcoating method          Special polyurea equipment spray (imported or local support)

Flash point                      200℃

Recommend procedures

Application scopes           Anticorrosion and waterproof of construction, chemical, traffic metallurgy, power generation, aerospace, marine, shipping and many other areas.

Shelf life                  6 months (Indoor with dry and cool conditions)

Packing                    Component A: 220kg/bucket, component B: 200kg/bucket

Production area              Minhang district, City of Shanghai (15% of raw materials imported form SWD US)

Security                   To apply this product must be accordance with the relevant     national regulation of sanitation, safety and environment protection. Do not even contact the surface of wet coating.

Global applicability         Our company aims to provide worldwide customers the same  coating products, but some small adjustments will be made to follow up different region conditions and international norms. In this case, an alternative product data will be provided.

Integrity declaration         Our company guarantees the reality of the listed data, due to the diversity and variability of the application environment, please test and verify it before use. We don’t take any other responsibilities except the coating quality self and reserve the right of modifying the listed data without prior notice.